Tag: Decoupage Effects

What is a stencil?

Stencil, or stencil plate is a sheet of waterproof material – most often plastic, but can also be paper, cardboard, rubber, metal, or wood – of which, certain patterns or designs are cut out from.

Once the sheet is laid flat on the surface of the item we wish to decorate, using acrylic paint, paint spray, or different pastes, to pain over. The colour or paste will pass through the perforations, leaving the desired patterns behind, after carefully removing the stencil plate.

As stencils can me made from a number of different materials, they also vary in their thickness. From simple thin, paper based stencils using paint, creating flat surfaces, to thicker stencils using thicker pastes, that will create 3D effect patterns that stick out from the surface.

Apart from the actual material, and thickness of the stencil plate itself, it is also possible to transfer the designs on a variety of different materials, such as, wood, paper, metal, wall, and even textile. Here is a great example and wonderful design on textile.

A great advantage of stencils, is that the plates can be reused on the same surface to extend on the repeating patterns, for example as a lace pattern would repeat itself. It can of course also be reused endlessly from time to time on different craft projects, as long as the plates are kept clean after every use, and the patterns remain intact.

The number of pre-cut stencil patterns and designs available is simply staggering. Thus, are proud to have an impressive variety available here at NapkinShop to browse from, for those who like to use this technique, or are fairly new to. However, with plenty of time and patience, and quite a bit of handicraft, it is also possible to create own designs. Using some sort of resilient & fairly transparent sheet, the desired design can be drawn over, and the accurately cut out with a sharp blade.

Here is a Youtube video, demonstrating the stencil technique, whilst up-cycling an old kitchen furniture. (Try adding on subtitles under the cog icon, in the bottom right-hand corner of the video)

The Cracker Medium

In this article, we will show you how to use this fantastic product from Pentart, what effects you can achieve, and other tricks and creative ideas to bring the most out of the technique.

With the crackle medium, we can achieve old & fantastic aged effects, of crackled paint on old objects & paintings, and the look as if the paint is about to peel away from the object.

In order to be able to start playing with the colours and different effects, first we need to understand how this works. The Crackle Medium is basically applied between two different colours of acrylic paint layers. We will need a base layer & this will be the colour of the crackles. Once the base layer has dried, we can apply the crackle medium. When the Crackle medium has also dried, we can then apply our top layer of a different colour. You will notice, as the top layer is drying, it activates the crackle medium. The cracks will start to create during the final drying stage & become more and more defined on the surface, showing the bottom layer’s colour, in the cracks.

Crackled effect bowl

The patterns of the cracks will depends on two factors; first, the thickness of each layer (the thicker the layers are, the larger the cracks will become), and second, the method used, to apply the paint layers. This can be either classic straight brush strokes, to create more organised, “parallel” cracks. Alternatively, sponge brush can also be used for applying the top layer, and that will create effect of more “messy” cracks.

It is important to note, the top layer should not be Metal, Pearl, or Chameleon effect paints, as these paints do not produce any spectacular cracks. Another key point to consider is also, when applying decoupage on top of the cracked surface, the top layes should always be of lighter tones (white, cream, beige, pastel colours, etc). This, in fact, is a general rule in decoupage, that due to the thin, and almost see-through nature of the napkin layers that we apply to any surface, the images only show clearly on lighter tone backgrounds. Dark-toned backgrounds, simply do not work well with decoupage, as they absorb the colours of a fine layer of papernapkin.

When decoupaging glass product with the crackled medium, the order of the layers do change however! The decopage image needs to go on first, once that’s dry, the Crackle medium can be applied. When the crackle medium is also dry, the top layer needs to be applied next, which will start the crackling effect as soon as these start drying. The final layer should be the bottom layer in this case, for the colour of the cracks. Take a look some beauiful and creative solutions in the videos below: